公司简介
公司简介
企业资质
联系我们
 
产品列表
热风炉
焚烧炉————————————(垃圾、木屑、化工氧化钴、布料、橡胶等)
生物质锅炉
真空锅炉
卧式燃油(气)蒸汽锅炉
燃煤锅炉
立式蒸汽锅炉
冷凝式燃气蒸汽锅炉
冷凝常压热水锅炉
导热油锅炉
承压热水锅炉
常压电加热热水型系列锅炉
壁挂式燃气锅炉
CWNS型系列锅炉
CLHS型系列锅炉
产品中心

产品特点:

  导热油锅炉是基于强制循环的设计思维而开发的直流式特种锅炉。

  封闭循环供热,与大气相通,可延长锅炉的使用寿命,液相输送热能,热损失。谀苄Ч灾,环保效果好。

  本体采用烟气三回程盘管设计,这种直流式结构,决定了传统锅炉所不具有的安全性。

  由于采用盘管式结构,因此,受热面充足,使其具有较高的热效率。

  导热油锅炉,显著的特点是逆流换热,燃烧排烟温度与热导油出口温差在 30 以下。

  导热油锅炉其卓越的结构,主要是在较低的压力下运行,获取 450  以下的工作温度,具有低压高温的特点。

Boiler explanation

  Heating conducting oil boiler is a direct special boiler based on circulation compulsion design ideas.

  Closed circulation heating connected to the atmosphere can prolong the life of the boiler.  Liquid phase transportation of heat minimizes the loss the heat.  The result of energy save is significant and the protection of the environment is great.

  The body uses three-loop piping design.  This is a direct circulation structure.  The design decides the safety not possessed by traditional boiler.

  Due to the piping design, the heating surface is abundant with high efficiency in heating.

  A obvious characteristic of heat conducting oil boiler is reverse heat circulation.  The difference of temperatures between combustion exhaustion and heat conducting oil is below 30.

  The excellence of the structure of the heat conducting oil boiler is to operate under low pressure to obtain working temperature below 450 .  These are its characteristics of low-pressure and high-temperature.  

Excellent System, Outstanding Characteristics

Perfect Design, Safe and Reliable

High Thermal Efficiency, Resources Saving

Easy Maintenance, Long Life

使用注意事项:

Special item to pay attention to when using:

■ 使用斯大导热油作为热载体的油、气的热载体锅炉,系统应配备膨胀槽,储油罐、安全组件,测量仪表和控制装置。

■ 导热油投入使用时,在开始运行阶段,先启动循环油泵,运行半小时后,再点火升温,初次使用时应缓慢升温,每小时升温约 20 ,当升温至180~ 200时,再保温一段时间,方可投入正常使用。

■ 在使用中应认真检查,严防水、酸、碱及低沸点物漏入使用系统,系统应装过滤装置,防止各种杂物进入,保证油品纯度。

■ 经使用半年后,应进行一次油品分析,长期使用后,若发现传热效果差,或其它异常情况,应对油品进行分析,根据分析结果决定添加或更换,判断标准量:碱碳不大于1.5%,酸值不大于0.5mgK(OH)/g,燃点变化不小于20%,粘度变化不大于15%,其中一项超标应更换新油。

■ 为确保导热油的正常使用寿命和导热效果,严禁超温使用。

The oil and gas heat conducting boilers that use Star heat conducting oil to be the heat conduction should be equipped with expansion groove, oil storage tank, safety parts, measurement instruments and controlling equipments.

When using heat conducting oil, at the beginning stage of operation, first start the circulation oil pump.  After half an hour of operation, inflame and raise the temperature.  When first using the boiler should raise the temperature slowly, 20 increase per hour.  When the temperature reaches 180~ 200, keep the temperature for awhile before normal operation.

Diligently perform inspections during the operation.  Prevent water, acid, and base and other low-heating-point substance to enter the operating system.  There should be filter system installed to prevent impurities from entering, to guarantee the purity of the oil.

 After using for half a year, an oil sample analysis should be performed.  After long-term use, if poor heating conduction is detected or other unusual conditions occur, analysis of the oil sample should be performed.  There should be addition or exchange based analysis results: alkali carbon no greater than 1.5% and acidic value no greater than 0.5mgkoH/g.  Point-to-point change is no less than 20% and adhesive degree is no greater than 15%. 

Any of these degrees is out of the standards should have new oil changed.  

配套辅机参数:

Special item to pay attention to when using:

先进的工艺流程:

Advanced work process

        有机热载体锅炉是一种新型的特种加热锅炉,具有低压高温的工作特点,工作压力在0.1Mpa,甚至常压供热温度,液相340摄氏度或汽相400摄氏度,整体结构具有一定的弹性,考虑到运行中受热后各部件的自由膨胀,采用弯曲盘管式受热面,为了运行的更为安全、高效,还增加了空气预热器,炉膛内燃烧度加强,流速也增加,使得更为高效、环保、节能的服务于各个行业。

    Organic heat conducting boiler is a new special heating boiler with low-pressure high-temperature specialty.  The work pressu, re is at 0.1Mpa, even for the normal pressure heating temperature.  At liquid phase of 340 degrees Celsius or liquid phase 400 Celsius, the whole structure is elastic.  With the consideration of the free expansion after heating of various parts in operation, winding piping heating surface is used for safer, more efficient operation.  In addition, air pre-heater is used and increased combustion temperature in the hearth, and increased flowing speed.  It makes the operation more efficient, environmental friendly and energy saving for all industries.

锅炉房示意图:

Boiler room diagram

型号 单位 YY(Q)L YY(Q)L YY(Q)L YY(Q)L YY(Q)L YY(Q)L YY(Q)L YY(Q)L YY(Q)L YY(Q)L YY(Q)L YY(Q)L YY(Q)L YY(Q)L
350 460 580 700 930 1200 1400 1750 2100 2350 2950 3500 4100 4650
Y(Q) Y(Q) Y(Q) Y(Q) Y(Q) Y(Q) Y(Q) Y(Q) Y(Q) Y(Q) Y(Q) Y(Q) Y(Q) Y(Q)
额定热输出功率 KW 350 460 580 700 930 1200 1400 1750 2100 2350 2950 3500 4100 4650
热效率 % 83
总发热量 104Kcal/h 30 40 50 60 80 100 120 150 180 200 250 300 350 400
出口管径 DN(mm) 65 65 80 80 100 100 125 125 150 150 150 200 200 200
烟囱直径 mm 250 300 350 400 450 500 550 660 650 700 750 800 850 900
烟囱高度   12 12 12 12 12 12 12 12 12 12 15 15 15 15
外形尺寸 直径mm 1480 1500 1550 1550 1570 1740 1760 1850 1900 1930 2000 2090 2210 2290
mm 1480 1500 1550 1550 1570 1740 1760 1850 1900 1930 2000 2090 2210 2290
mm 1170 1180 1220 1260 1350 1670 1750 1880 1950 2060 2180 2380 2610 2770
  轻油 Kg/h 35 46 58 70 95 121 131 176 212 236 297 352 412 468
天然气 NM3/h 42 56 70 85 114 147 159 213 257 286 360 427 500 567
城市煤气 NM3/h 90 119 149 181 242 312 338 453 546 608 765 907 1062 1205
油泵 流量 M3/h 20 28 34 40 43 60 75 100 110 120 160 200 240 280
扬程 M 40 45 45 50 50 50 50 53 54 55 60 60 60 65
耗电 KW 5 7.5 7.5 10 15 15 20 25 30 40 50 60 75 100
运输总量 KG 3300 3400 3700 4000 5500 6300 8500 10600 12000 12800 16800 20000 24800 29100




分享到: 更多
返回
pk10改单 | 公司简介 | 产品中心 | 公司动态 | 成功案例 | 企业资质 | 联系我们


版权所有 © 2017 版权所有 镇江海太锅炉制造pk10改单
技术支持:镇江久一信息技术pk10改单 备案号:苏ICP备14059226号-1